 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| OTS-1L Wideband Optical Link Optiva(R) SERIES Professional Media Transport SATCOM 50MHz to 3000MHz Wideband Optical Link Optiva(R) Wideband fiber-optic links are optimized to perform in the 50 to 3000 MHz frequency range providing transparent signal transportation for satellite antenna applications. The unique features of the OTS-1LT series include simple push button peaking for optimum performance and our patent-pending SmartGainTM Control, which ensures consistent performance over varied signal conditions. As with all Emcore optical products, the highest quality components and modern production techniques insure that intra-facility links provide the highest performance as a cost-effective alternative to coaxial cable. They provide much longer transmission distances than copper cables, simplify network design, ease installation and even enhance immunity from EMI, RFI and lightning. These transmitters and receivers take the high RF performance and diverse features of Emcore's Ortel technology and combine them into a compact package Unique peak optimizer and SmartGainTM control 50 & 75 Ohm BNC or 50 Ohm SMA Tx & Rx RF power monitors via LED, SMA & remote LNB power SNMP monitoring and control High-dynamic-range, optically-isolated DFB lasers run cooler and require less power Fits in Optiva(R) enclosures, which support Daisy ChainTM video, audio and data links. Hot swap redundant power supplies virtually eliminate downtime 16, 4, 2, & 1 slot enclosures available CE & CSA Certified Device compatible with the Optiva(R) OT-CC-16 chassis. Features atures 50 to 3000 MHz optimized for IF, L and S band satellite signals 30dB adjustable gain range provides perfect level match for signal distribution System Design Optiva(R) is a completely modular hot-swappable platform. Both 19" rack mount and compact tabletop or wall-mountable enclosures are available. The 19" rack-mount enclosure (Model OT-CC-16) can support up to 16 insert cards and provides a single power supply (Model PS-200), or a dual-redundant, hot-swappable power supply option. Compact enclosures are available with 1, 2 or 4 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2) enclosures both use an external power supply (PS-9012) and optionally have a standard 2-pin DC power connector for more custom applications. The four-slot 1 RU enclosure (OT-CC-4) uses an integrated power supply. The Optiva(R) family's existing wide range of video, audio and data transport products include a unique Daisy-ChainTM feature that multiplexes multiple electrical inputs onto a single fiber, thus resulting in an extremely capable, yet conveniently flexible, signal transport system. Transmitter DC to LNB Receiver SIN Push button Optimizer SL Laser PL PR PhotoDiode SOUT SMON SMON Copyright (c) 2009 Emcore Corporation 626 293 3400 satcom-sales@emcore.com www.emcore.com OTS-1L Wideband Optical Link Optiva(R) SERIES Professional Media Transport SATCOM Performance Highlights Parameter Link Frequency Range 50 Ohm 75 Ohm Fiber Distance Optical Loss Air Temperature TXz RF Input within SGC range1 TX Gain (TG) at max, 1 GHz2 TG Adjustment Range (reduction from max) Noise Figure (TG at max, 2150 MHz, 1dBo loss) Spur Free Dynamic Range (1dBo loss) LNB Voltage Current Optical Power DC Power LNB Off RX RF Output (Tx at peak, 1 dBmo into Rx) RX Gain (RG), at max, 1 GHz 2 Typical S21 Min 50 50 0 0 -10 0 30 19 100 16 3 20 15 20 -12 -6 - Typical 0 to -35 8 13 103-108 17 4 12 -8 to -25 22 25 15 12 - Max 3000 2500 20 8 50 19 350 5 350 10 10 250 Units MHz MHz Km dBo C dBm dB (W/A) dB dB dB/Hz/ V mA dBmo V mA dBm dB (A/W) dB dBm dBm dBmo dBmo V mA 2 dB per division 3.0 GHz .05 GHz 3.6 GHz OTS-1L (TX & RX) RG Adjustment Range (reduction from max) Output IP3 (2150 MHz) Output 1dB compression (2150 MHz) Optical Input Optimal DC Power 1. Wider RF inputs are acceptable, but will set the RF amp gain to its limit. 2. Link RF GaindB = TG + RG - 2*FiberLossdBo (assumes Rin = Rout) 3. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB 5.06 in. 128 mm 3 RU TX Enclosure Options RX Ordering Information Product Code OTS-1LT/B5-1303-SA-IC OTS-1LT/B7-1303-SA-IC OTS-1LT/S5-1303-SA-IC OTS-1LR/B5-SA-IC OTS-1LR/B7-SA-IC OTS-1LR/S5-SA-IC OPV-CTLR-IC OTP-1ETR-A2/A2 OT-CC-16-01 PS-200-(xx) OT-CC-4-1U-(xx) OT-DTCR-1 / OT-DTCR-2 Specifications Transmitter, 50-3000 MHz, BNC 50 ohm, 1310 nm, 3dBm (min), SC/APC Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 3dBm (min), SC/APC Transmitter, 50-3000 MHz, SMA 50 ohm, 1310 nm, 3dBm (min), SC/APC Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC Receiver, 50-2500 MHz, BNC 75 ohm, SC/APC Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC NMS SNMP Controller Card & MIB for Optiva Family Optical Tcvr, 1Ch, Ethernet, SM, Dual LC Chassis, Rack Mount, 16 Slot, 3RU, Rear Access Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz, (Specify power cord (NA, EU, UK)) Chassis w/ built-in Power Supply, 1 RU, 4 slots, 110- 240 AC input, Power Cord Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot OT-CC-16 OT-CC-4 OT-DTCR-2 OT-DTCR-1 FCC PART 15 COMPLIANT USA MADE IN Information contained herin is deemed to be reliable and accurate as of issue date. Emcore reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of the EMCORE Corporation. Document Revision 3/29/2009 Copyright (c) 2009 Emcore Corporation 626 293 3400 satcom-sales@emcore.com www.emcore.com |
Price & Availability of OTS-1LT-B5-1303-SA-IC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |